PolyFarm LLC of Caldwell, Idaho

Mono Vault Specs

130s shotgun rifle

Mono Vaults are constructed of polyethylene with nominal 1/4" wall thickness.  All Mono Vaults are equipped with a threaded and gasketed wide mouth lid to protect the contents from the elements.  A Burial Shield (included) fits over the lid assembly to protect it from physical damage.  The Burial Shield can be secured in place with the optional Lock Strap which accommodates standard padlocks with up to a 1/4" shackle.  In burial applications, the Burial Shield directs moisture away from the gasketed lid, keeps the lid area clean, protects the lid from soils and foot traffic, and protects the lid from excavation damage in recovery.

Use the chart below to find the right sizes for your applications.

Click on the model number to view that item in the store.

 
  107s 110s 120s 130s 152s 207s 212s 236s 248s

inside

diameter

9+ 9 3/4 9 3/4 9 3/4 9 3/4 12 1/4 12 1/4 12 1/4 12 1/4

inside

depth

4 1/4 7 1/2 18 28 3/8 49 3/8 4 1/4 10 1/2 34 45

opening

diameter

8 3/4 8 3/4 8 3/4 8 3/4 8 3/4 10 3/4 10 3/4 10 3/4 10 3/4

vault

O.D.

10 1/4 10 1/4 10 1/4 10 1/4 10 1/4 12 3/4 12 3/4 12 3/4 12 3/4

Shield

O.D.

10 1/2 10 1/2 10 1/2 10 1/2 10 1/2 13 13 13 13

overall

height

7 10 20 1/2 30 5/8 51 5/8 7 12 3/4 36 3/4 47 3/4

weight

in lbs

4 5 8 11 17 7 9 16 18

cubic

feet

0.2 0.3 0.8 1.2 2.1 0.3 0.7 2.3 3.1
gallons 1.4 2.2 5.8 9.2 16.0 2.2 5.4 17.2 23.0
approximate gun storage fit and/or capacities

revolver,

snub nose

many many many many many many many many many

semi-auto,

4-5" bbl

1-2 5-8 many many many 4-6 many many many

AR,

separated

no no no

4

20"

many no no many many

scoped AR,

separated

no no no 2 many no no many many

scoped AR,

assembled

no no no no no no no note 1 yes

 AK,

scoped

no no no no no no no ? many

AK,

folding

no no no yes many no no many many

carbine,

folding

pistol grip

no no no yes yes no no many many

shotgun,

folding

pistol grip

no no no yes yes no no many  many

shotgun,

pump

no no no no

30"

bbl

no no yes*

24"

bbl

bolt gun,

scoped

no no no no

29"

bbl

no no no

24"

bbl

 

107s 110s 120s 130s 152s 207s 212s 236s 248s
note 1:  Fits most carbines with 16" barrels and collabsible stocks... measure your gun
How to read this chart... 
107s and 207s open - logoPlease note that all dimensions and fits are approximate.  It is not unusual for the diameters to vary from the nominal dimension by as much as 1/4" and the lengths by as much as 1/2".  Weights are approximate.  As with all polymer products, dimensions will fluctuate with temperature.  Due to the nature of the molding process, some distortion is normal.
Gun capacity info is provided as a guideline only.  Measure your gun.  A factory Remington 700 and Remington 870 were used to determine barrel length fit (the 26" 870 shotgun, measuring 25.5" actual, did fit in the 248s tested if placed at an angle).  Guns will vary in dimensions.  As an example, the 130s has been checked with ARs with and without scopes, and pistol grip folding AKs, Mini-14, 10-22, and pump shotgun.  They fit.  However, there are certainly examples out there of each of these firearms that would not fit.  A 16" mini-14 with a threaded barrel and flash supressor may be too long while a welded flash suppressor (frequently on shorter barrels for overall 16" length) may fit.  Likewise, a folding stock on a goose gun would not fit the 130s (don't know why one would put a folder on a goose gun) while a folder on a handy defensive shotgun will.
TOUGH ENOUGH TO BURY, LIGHT ENOUGH TO CARRY.TM
 

Search Products


TankBarn!

New Site!

Emergency water storage

- 1 gallon to 3000 gallons -

round, oval & rectangular tanks

drums - fuel cans - carboys

barrels, buckets & lids

www.TankBarn.com